Acrylic Resin is a two-component organic resin, which cures at room temperature with the help of a water-based catalyst. Acrylic Resins are therefore the ecological alternative to Polyester Resin and can be used in laminate processes just like these. Feroca Acrylic Resin is especially suitable for molding artistic parts by casting in silicone mold since this type of resins are of very low reactivity and barely wear out the molds.
Non-toxic and odorless resin. Suitable for artisticcasting and fiber laminates. Compatible to coat Porex.
View product19,00 € No VAT
available
Increases resin setting timeI use up to a maximum of 1% of the total weight of the mixture.
View product5,00 € No VAT
available
Thixotropic additive for AcrystalAllows resin to be applied to vertical walls.
View product5,00 € No VAT
available
Acrylic Varnish Solvent-free satin. NON-TOXIC, practically odorless. Ideal for protecting acrylic resin...
View product30,00 € No VAT
available
Acrylic resin for casting and laminated in fiber Solvent-free and VOC-free Fire-resistant Lightweight...
View product32,00 € No VAT
available
Acrylic Resin Kit for Casting and Replicas Solvent-free and VOC-free Fire-resistant Lightweight and...
View product37,00 € No VAT
available
Acrylic cement system for pour and laminated in fiber Solvent-free and VOC-free Fire-resistant...
View product50,00 € No VAT
available
Acrylic cement system for pour and laminated in fiber Solvent-free and VOC-free Fire-resistant...
View product40,00 € No VAT
available
Acrylic aqueous dispersion pigments. UV resistance 100% compatible with Jesmonite resins.
View product17,00 € No VAT
available
Retardant for Jesmonite Resins. Extends resin working time. Add between 2gr. and 8gr. per Kilo.
View product14,00 € No VAT
exhausted
29,00 € No VAT
available
Cuatriaxial laminate fabric It gives strength and lightness to the parts. Compatible with Jesmonite AC100
View product10,00 € No VAT
available
Jesmonite Cured Sample Box3 different sample boxesTo show your customers possible terminations.
View product30,00 € No VAT
available
Jesmonite Cured Sample Box3 different sample boxesTo show your customers possible terminations.
View product30,00 € No VAT
available
Jesmonite Cured Sample Box3 different sample boxesTo show your customers possible terminations.
View product30,00 € No VAT
available
Mixer padel racket for professional blender. Available in two sizes.
View product25,00 € No VAT
Try with different combination
Thixotropic additive for Jesmonite resins. Increases the viscosity of the resin. Ideal for verticaljobs....
View product25,00 € No VAT
available
-Synthetic reinforcing fibers -Synthetic polyvinyl alcohol. -They provide strong adhesion and resistance.
View product52,00 € No VAT
available
Suitable for materials such as gel layers, lak and high gloss composites, etc. It provides a high...
View product20,00 € No VAT
available
Simple polishing paste system. Medium grain polishing paste. Suitable for all painting systems and for...
View product16,00 € No VAT
available
Suitable for materials such as gel layers, lacquers and high gloss composites, etc. It provides a high...
View product16,00 € No VAT
available
10,00 € No VAT
available
10,00 € No VAT
available
22,00 € No VAT
available
9,00 € No VAT
available
10,50 € No VAT
available
15,20 € No VAT
available
9,00 € No VAT
available
Water-based matte and opaque acrylic colours For miniatures in fantasy games. They can mix with each...
View product2,30 € No VAT
available
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
