promotion
- Alginate and plaster kit.
- Ideal for molds and copies of hands, feet, etc...
- 100% safe and safe. Perfect for use with human body.
- Easy to use, comfortable and clean.
- Includes mixing glass.
201400000
promotion
201400000
Molding kit with everything necessary to make a mold of the human body and its subsequent copy in plaster.
The kit consists of:
PRODUCT CHARACTERISTICS:
Alga-Cast Slow, Feroca's alginate for molds is a perfect molding material for making "temporary" molds of the face, hands and other parts of the human body. For the realization of reusable molds (of more than one use) it is recommended to use silicone suitable for the body, such as the FerocaBody Silk-Cast.
Alga-Cast Slow captures detail at levels not previously reached by any other alginate.
Alga-Cast Slow is easy to use and hardens quickly. In a few moments you will have a perfect mold ready to cast once or twice nothing more, depending on the material to cast.
| Product | A:B Mix | Cured Time |
| Alga-Cast Slow | 3 Water:1 Powder by volume | 9-11 minutes. |
Plaster Arquero is a plaster of very high strength and little absorption. It does not produce efflorescence (exit of salts).
It has one of the lowest expansions available on the market. Its setting is gradual and has a long period of plasticity.
Its high hardness and strength makes it ideal for final pieces that last a lifetime.
Preparation of the mixture.
Weigh the plaster and water for each mixture. The water-gypsum ratio is a critical factor, since the final strength and density of the piece depends on it.
Use drinking water at a temperature of between 21º and 38ºC since variations in the temperature of the mixture (water-gypsum) can produce changes in the setting time.
It is important to keep water and plaster in a temperature environment within the mentioned range before using them.
The higher the water temperature, the shorter the setting time.
Slowly and gently empty the plaster into the water. Soak for 1 to 2 minutes. The gypsum must be fully dispersed in the water before mixing. Small amounts of plaster require less wetting time than large ones.
| ANATOMY | AMOUNT ALGINATE * |
| Baby's foot/hand | 300 gr. |
| Adult foot/hand | 500 gr. |
| Earless face | 500 gr. |
| Full head to shoulders | 1,5 Kg. |
| Front torso | 750 gr. |
| Full Torso | 1,5 Kg. |
| Arm up to the elbow | 750 gr. |
| Buttocks | 500 gr. |
| Intimate Parties | 300 gr. |
| Whole body | 7 Kg. |
*Quantities offered as a guide. The final result may vary depending on each body and the expertise of the person making the alginate mold. The end user assumes full responsibility for the material needed.
SIMPLE ALGINATE MOLD AND TRICKS
LIFE CAST COMPLETE IN ALGINATE
No customer reviews for the moment.
The best kit to create alginate molds and plaster copies
Feroca Kit
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
