Horario de atención y direcciones de las tiendas

Addition Silicones (Platinum Catalyst)

Skin Tite®

silicone adhesive suitable for skin.
Quickly create effects of wounds, scars, etc ...
Use it to paste makeup effects created with Dragon Skin

More details...

Availability : This product is no longer in stock


20,00 €

tax excl.

Skin Tite® is a skin safe silicone used to create fast wounds, scars and to adhere silicone appliances directly to the skin. It can be sculpted “on the fly”, offers maximum control and stays precisely where you put it. Skin Tite® will adhere to the skin and perfectly conforms to all contours. Cured rubber is strong and will flex with body movement. Wounds and appliances will not come off until you remove them. Material is skin safe and certified by an independent laboratory to OECD TG 439 and ISO 10993-10.

An infinite variety of color effects are achieved using Silc Pig® silicone pigments. Blended Silc Pig® color pigments added to Skin Tite® will create hyper-realistic cuts, scars, slash wounds, bruises, necrotic (dead skin) effects, bullet holes and more. Thi-vex® thickener will thicken Skin Tite® for even greater vertical hang control and is ideal for creating skin pockets, hanging skin, deep cuts & wounds, holes and more.

Bio-Adhesive: Skin Tite® can also be used to adhere skin effects silicone appliances or silicone masks to the skin even when affixed to hard to hold areas such as elbows, fingers and joints. It is ideal for repetitive motion applications. Skin Tite® will release from closely cropped hair-covered skin surfaces (short arm hair, beards, moustaches and eyebrows). Product Listing

Store and use all products at room temperature (72° F / 22°C). This product has a limited shelf life and should be used as soon as possible.

We recommend that you do a small scale test on the back of your hand to ensure that you have no allergic reaction to silicone. If you notice any type of skin reaction, do not use product.

Important: Warmer temperatures will reduce pot life and accelerate the cure time of Skin Tite®.

Skin Tite® is a platinum-cure silicone. Platinum-cure silicone rubber may be inhibited by certain contaminants such as latex, skin oils, aloe vera, sulfur based clays, urethane rubber and tin-cured silicone rubber resulting in tackiness at the mold interface or a total lack of cure throughout the piece. If compatibility between the rubber and a surface is a concern, a small-scale test is recommended.Inhibition has occurred if the rubber remains uncured after the recommended cure time has passed.

Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Adding Color - Silc Pig ® silicone pigments can added and mixed thoroughly into Skin Tite® for matching a skin color, etc.

Mixing - Skin Tite® can be hand mixed. Aggressively hand mix for 30 seconds, making sure that you scrape the sides and bottom of your mixing container several times.

1. Using As A Bio-Adhesive - Skin Tite® can be used to temporarily adhere a previously made platinum silicone prosthetic appliance to human skin.

Here’s How To Do It: Clean the skin to remove any oils which may affect the curing of the Skin Tite® adhesive. Mix the Skin Tite® thoroughly (1A:1B). After mixing, brush a small amount of Skin Tite® onto the appliance or surface of the skin. Hold the appliance to the skin until the Skin Tite® is cured. This should occur in approximately 5 minutes or less, dependant on body temperature. A higher temperature will cause the Skin Tite® to cure faster. Once the Skin Tite® is cured, it will remain tacky. Use a small amount of Skin Tite® to carefully blend the edges of the appliance if needed. After Skin Tite® is fully cured, theatrical makeup can be used to further blend and color the piece. To remove the appliance from the skin, slowly peel the piece away from the skin. Using baby oil or make-up remover can assist in removal.

Customers who bought this product also bought :

Silastic 3481 Base + Curing agent S83


20,00 €

Prosthetic Látex Foam from Monster Makers


37,50 €

Skin Illustrator Activator


10,50 €

Bdellium SFX 191 Precision Stippling

Bdellium SFX...

12,00 €