Horario de atención y direcciones de las tiendas

Addition Silicones (Platinum Catalyst)

SORTA-Clear® 12 -Translucent Silicone-

  • Translucent platinum silicone
    Catalyst mixture 1A: 1B (equal parts)
    Ideal for jewelry and prototyping.

More details...

Availability : This product is no longer in stock

Kit de 900grm.

38,00 €

tax excl.

SORTA-Clear® Series rubbers are premium water white translucent silicone rubbers (platinum catalyst) which cure at room temperature with negligible shrinkage. Sorta Clear 37 has Shore 37A hardness and features high tensile and tear strength.  This product also offers the convenience of a 1A:1B by volume mix ratio.

SORTA-Clear® silicones are ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting). Materials such as urethane, epoxy or polyester resins can then be cast into SORTA-Clear® silicone without application of a release agent. Other materials such as wax and low melt metal alloys can also be cast into SORTA-Clear®. SORTA-Clear® can be pigmented with SILC Pig® silicone pigments.

SORTA Clear® silicone rubbers are FOOD SAFE and can be used for culinary applications including casting chocolate and other confections.

Safety – Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber.

Store and use material at room temperature (73°F/23°C). Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.

Cure Inhibition – Addition-cure silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, tin-cure silicone, sulfur clays, certain wood surfaces, newly cast polyester, epoxy or urethane rubber may cause inhibition. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed.

Piel realizada con Dragon Skin

Customers who bought this product also bought :

Measuring cup for mixing

Measuring...

0,70 €

Worbla's Pearly Art. Termoplástico.

Worbla's...

14,88 €

Small wooden spatula (100 pc) Depressor.

Small wooden...

3,00 €