- Professional modeling plasticine of various hardnesses.
- Suitable for Condensation Silicones (tinCatalyst)
- With malleability and reuse control.
- Dark gray color.
J. Herbin is a professional quality plasticine for modeling of high finesse and with great carving details.
Ideal for sculpture, Special Effects (FX), Stop Motion, modeling and other creations.
J. Herbin plasticine is available in 5 different hardnesses and can be used in 3 different ways: solid, softened or liquid (heating).
J. Herbin offers you two shades, dark gray and ivory, choose the one you like best.
It is compatible with condensation silicone elastomers (tin), but not with addition (platinum) and is usually applied to design new shapes, reproduce objects, create silicone molds (circumscribing profiles or grinding details of the piece to be molded).
Use:
This plasticine can be used at room temperature. Sometimes it is necessary to heat the harder versions to make them more malleable. It is recommended to use higher hardness as the piece to be sculpted is larger.
The plasticine is liquefied in a water bath, in an oven or any container that can be heated (See the melting point instructions on the package) Once in a liquid state, mix the plasticine to reincorporate the oils that may remain on the surface. Remove with a clean tool.
Precautions: Plasticine can be worked without risk, although the usual precautions must be respected when working with chemicals. Wear waterproof gloves and be careful about touching freshly heated plasticine as it can burn. Wear safety glasses when working with liquid plasticine. In case of skin contact, clean the area with hot water and soap.
HARDNESS GUIDE:
Hardness 40 | Hardness 50 | Hardness 55 | Hardness 60 | Hardness 70 |
| Very soft | Soft | Normal | Hard | Very hard |
No customer reviews for the moment.
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
