Vacuum Systems

Complete Vacuum System for Degassing

Complete Vacuum System for Degassing
  • Vacuum system consisting of a pump and a vacuum hood.
  • Pump of 12 CFM (20.4 m3/ hour) or 99.995% vacuum.
  • 26 litre chamber with transparent lid.
  • It includes everything you need to get the system up and running.

Read more...

230100000

600,00 €

No VAT
726,00 € (tax incl.)

Our vacuum system (pump and hood) is perfect for degassing most silicones or resins before they begin their curing process and air bubbles become trapped, including the fastest resin of all, polyurethane.
The bigger the chamber, thebigger things will fit, so you can put it from a small laundry to a 20Kg. can of resin or silicone to degass it. A large chamber (26 liters) can be emptied by any pump, small or large, and this is where we start talking about the bombs.
In the market you can find vacuum pumps large and small, the difference between each other, in addition to the quality of the joints, is the suction power, that is how fast they perform the total vacuum of the hood.
Small vacuum systems exist on the market, but these systems will not serve to degass certain products, such as polyurethane, why? because these small systems will indeed make the total vacuum (99,995%), but they take too long and polyurethane is too fast for them. In this case it does not matter whether the hood is large or small, if the pump is small (less than 8 CFM), it will only allow its use in long healing products (silicones, polyester). With a large pump (from 10 CFM) quick vacuums (about 1 minute) can be made so it gives time to draw air out of the mixture of products like polyurethane before it hardens. It should be noted that the air is coming out during the vacuum process, not at the end of it.
For all this we are completely sure that our vacuum system will cover all your molding needs, allowing you to perform professional quality runs, free of unpleasant bubbles or air bubbles.
Feroca's vacuum system includes everything you need to get it up and running, oil, hose, silicone silicone seal, power cord and connectors.

chamber DIMENSIONS

Internal volumeExternal dimensions (mm)Internal dimensions (mm)
(H x Diameter)
Weight(kg)Recommended capacity
26L 440 x 395 x 330 295 x 290 14.55 6L

VACUUM TIMES

BOMB
(12CFM/340l/m)
Time to 90% vacuum 0m 30s
Time to 99% vacuum 1m 0s
Time to 99.9% vacuum 1m 30s
VERY IMPORTANT: Choose correctly between 110V and 240V (240V usually in Spain) and fill the oil tank to the level indicated in the instructions before putting the pump up and running for the first time.

STANDARD VACUUM SYSTEM


No customer reviews for the moment.

Write your review

Complete Vacuum System for Degassing

Complete Vacuum System for Degassing

  • Vacuum system consisting of a pump and a vacuum hood.
  • Pump of 12 CFM (20.4 m3/ hour) or 99.995% vacuum.
  • 26 litre chamber with transparent lid.
  • It includes everything you need to get the system up and running.

Write your review

Customers who bought this product also bought :

Vacuum chamber silicone seal

Vacuum...

35,00 €

AXSON F38 -Resin for scale model industry-

AXSON F38...

21,90 €

Silastic 3481 Base + Catalyst

Silastic...

22,00 €

Key-Pigments -Silicone Pigments for FX-

Key-Pigments...

6,00 €