Epoxy Resins

TRANSLUX D151 FAST -Fast Transparent Epoxy-

TRANSLUX D151 FAST -Fast Transparent Epoxy-
  • Low viscosity. Great transparency.
  • Perfect for Jewelry.
  • Easy bubble removal.
  • Great transparency.
  • Very good UV resistance.
  • Rapid version of the Translux D150

Read more...

Kit 1.5 Kg.
Kit 7.5 Kg.
Kit 37.5 Kg.

35,00 €

No VAT
42,35 € (tax incl.)

UTILIZATION

Mix the resin and hardener with the ratio 2 parts of A to 1 part B by weight. Mix until you get a perfect homogeneity. It is possible that during mixing, a certain yellow hue may appear but the material will become colorless as it polymerizes.

To be a transparent epoxy resin, the Tranlux D151 is considerably fast and in less than 24 hours at room temperature the part will be ready to demold. In thin thicknesses of less than 2mm the times can be lengthened.

Ideal for occlusions, jewelrytransparent effects on furniture, etc.

Remember that it is characteristic of this resin that at low temperatures its viscosity increases, even producing a granulated effect, similar to what happens with olive oil or honey. This does not mean that the resin has degraded, but it cannot be used in this state since the catalyst would not react with these balls and whitish areas would appear without catalyzing. As in the previous cases, the effect disappears by bringing the product closer to a heat source (radiator) or subjecting it to the "bain-marie" and waiting until the resin cools and recovers the temperature of use, between 20 and 25ºC

FEATURES:

-UV resistant

-Excellent fluidity, which minimizes the appearance of bubbles.

-The use in layers is recommended in the case of thick and large pieces.

-Hardness:  100 shore A - (Measured after curing 16 hours at 60ºC.)

-Curing Time - 24 hours at 25ºC. About 10 hours if we bring the resin closer to a heat source (radiator)

MIXING IN VOLUME:

-2 parts translux D150A

-1 part  of  TRANSLUX D151B 

APPROXIMATE CONSUMPTION:

- 1 Kg per m2 for 1mm layer.

Product Mix A:B
Colour Release time 
Working time
Viscosity  Shore Hardness
Density
TRANSLUX D151 FAST 2A:1B by weight

Transparent

24 hours at 25ºC 6 hours at 25ºC

220 mPa.s.

100A 1,05

READ CAREFULLY THE INSTRUCTIONS AND SAFETY DATA SHEET HOSTED ON THE TECHNICAL DOCUMENTS TAB

clic adjuntos

GEMSTONES WITH EPOXY RESIN

HOW TO MAKE A PENDANT WITH EPOXY RESIN

TITANIC DIORAMA WITH EPOXY RESIN

No customer reviews for the moment.

Write your review

TRANSLUX D151 FAST -Fast Transparent Epoxy-

TRANSLUX D151 FAST -Fast Transparent Epoxy-

  • Low viscosity. Great transparency.
  • Perfect for Jewelry.
  • Easy bubble removal.
  • Great transparency.
  • Very good UV resistance.
  • Rapid version of the Translux D150

Write your review

Customers who bought this product also bought :

PlatSil 73-15 -Platinum Silicone-

PlatSil...

38,00 €

Polyester Resin Repair Kit

Polyester...

22,86 €

Epofer EX401+E416 -Epoxy Laminates-

Epofer...

23,00 €

Worbla's Pearly Art. thermoplastic.

Worbla's...

14,88 €