Epofer Accelerator is an accelerator for curing epoxy systems.
Solvent-free. Cured at room temperature, low viscosity, without fillers. The increase in accelerant increases the rigidity of the laminate, but in casting an excess of accelerant can lower the hardness of the piece.
| TECHNICAL DATA: | |
| Mixing ratio: | 1 to 5% by weight of the total mixture A+B |
| Colour | Amber |
| Density, at 25ºC, g/cm3 | 0,98 |
| Viscosity at 25 ºC, cps | 120-150 |
| Flash Point, ºC | 140 (c. closed) |
| Temp. Boiling, ºC | 250 |
TECHNICAL DOCUMENTS | TECHNICAL DATA SHEET | |
| SAFETY DATA SHEET |
No customer reviews for the moment.
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
