Alga-Cast Fast, Feroca mold alginate is a perfect molding material for making "temporary" molds of the face, hands and other parts of the human body. For the realization of reusable molds (more than one use) it is recommended to use body-friendly silicone, such as Feroca's Silk-Cast Body.
Alga-Cast Fast captures the detail at levels not reached before by any other alginate.
Alga-Cast Fast is easy to use and hardens quickly. In a few moments you will have a perfect mold ready to strain once or twice nothing else, depending on the material to be strained.
We recommend back grinding with plaster bandages to hold the silicone mold: Plaster bandages
| product | Mix A:B |
Curing Time |
| Alga-Cast Fast |
1 to 3 parts water:1 part powder in volume |
3-3'5 minutes. |
| anatomy | ALGINATO AMOUNT * |
| Baby's foot/hand |
300 gr. |
| Adult foot/hand |
500 gr. |
| Face without ears |
500 gr. |
| Full head up to shoulders |
1.5 kg. |
| Front torso |
750 gr. |
| Full Torso |
1.5 kg. |
| Arm to the elbow |
750 gr. |
| buttocks |
500 gr. |
| Intimate Parts |
300 gr. |
| Whole body |
7 kg. |
*Quantities offered as a guide. The end result may vary depending on each body and the expertise of the person making the alginate mold. The end user assumes full responsibility for the material in need.
 |
Sheet |
FULL LIFE CAST IN ALGINATO
SIMPLE ALGINATE MOLD AND TRICKS
No customer reviews for the moment.
El mejor kit para crear moldes de alginato y copias en escayola
Cómo hacer un molde de un rostro con Alginato paso a paso
CÓMO HACER UN MOLDE SENCILLO DE ALGINATO
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Smooth-On, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
