Polytek PlatSil Silicone was a revolution in the market when it was introduced over 15 years ago. It has been imitated many times but never equaled in quality.
PlatSil Gel OO20 is an easy to mix 1A:1B bi-component platinum silicone that cures quickly and extremely reliably.
Being an extremely low hardness silicone it can be used for creating hyper-realistic masks, prosthetic applications, animatronics, medical simulation and other Special Effectsapplications.
It can be applied by brush thickening it with its own Thixotropic PlatThix
PRECAUTIONS:
Sulfur contamination (e.g. sulfur based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit the surface cure of platinum cured rubbers.
| Product | A:B Mix | Working Time | Cure Time | Shore Hardness | Color | Mix Viscosity | Specific Volume | Shrinkage |
PlatSil Gel OO20 | 1A:1B by weight or volume | 40 min. | 2 hours | OO-20 | Translucent | 3.900 cP. | 26 in³/lb | Negligible |
| PlatSil Gel OO30 | 1A:1B by weight or volume | 45 min. | 4 hours | OO-30 | Translucent | 6.200 cP. | 26 in³/lb | Negligible |
| PlatSil Gel OO | 1A:1B by weight or volume | 6 min. | 30 min. | OO-30 | Translucent | 22.000 cP. | 25 in³/lb | Negligible |
PlatSil Gel 10 | 1A:1B by weight or volume | 6 min. | 30 min. | A10 | Translucent | 15.000 cP. | 25 in³/lb | Negligible |
PlatSil Gel 25 | 1A:1B by weight or volume | 5 min. | 60 min. | A25 | Translucent | 3.500 cP. | 25 in³/lb | Negligible |
DOCUMENTATION | TECHNICAL DATA SHEET | |
| SAFETY DATA SHEET |
No customer reviews for the moment.
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
