
PolyFoam F-5 is a two-part flexible polyurethane casting foam.
This self-adhesive foam has a free-rise density of 80Kg/m³, and offers a good level of surface detail and mold fill
This foam is perfect for the production of accessories, tools and any decorative, functional or artistic object that needs to be flexible and lightweight.
In general, PolyFoam products should be molded in PlatSil silicone molds.
These foams can also be poured into urethane rubber molds.
Polytek foams can be pigmented with the Polycolorseries of pigments
Product | Mixing ratio | Mixing viscosity | Cream time | Foaming Time | Tack-Free Time | Release time | Free Rise Density | Moulded density |
PolyFoam F-3 | 1A:2B by weight or volume | 2000 cP | 25 sec | 1.5 min. | 3 min | 10 minutes | 48 Kg/m³ | 80-128 Kg/m³ |
PolyFoam F-5 | 1A: 1B by weight or volume | 1400 cP | 45 sec | 3-5 min.* | 25 min | 30-60 min | 80 Kg/m³ | 128-240 Kg/m³ |
* Depending on mass and ambient temperature
No customer reviews for the moment.
Write your review
* Required fields
or Cancel