PolyFoam R-5 is a two-part rigid polyurethane casting foam.
This self-adhesive foam has a free climbing density of 1.36Kg/ft3, and offers a good level of surface detail and mold padding.
This foam is perfect for the production of parts filling, decoration objects, light countermoldses, parts series, models, prototypes, duplicate masters, etc.
In general, PolyFoam products should be molded into PlatSil silicone molds.
These foams can also be poured into urethane rubber molds.
Polytek foams can be pigmented with the Polycolor pigment series
| product | Mixing ratio | Viscosity of the mixture | Cream time | Foam time | Tack-Free Time | Pull time | Free climb density | Molded density |
PolyFoam R-5 | 1A:1B by weight or volume | 1100 cP | 45 seconds | 2 min. | 3 minutes | 10-15 minutes* | 1.36 Kg/ft3 | 7 Kg/ft3 |
No customer reviews for the moment.
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
