The Poly 74 and Poly 75 urethane rubber series are urethane rubbers that offer higher than normal performance.
Poly 75-70 cures at room temperature without noticeable contraction. The mixture is very comfortable and is made equally in volume.
It is not necessary to extract the air by vacuum hood and the resulting molds have a very high production.
Poly 75-70 works especially well with pigmented or colored concrete (concrete), in molds made with Poly 75-70 reproductions will have precise and uniform colors.
These rubbers are commonly used in the following applications: Concrete Casting(Concrete),Sculpture and Casting,Architectural Reproduction and Restoration, Carpentry and Ornamentation,Candle Manufacturing,Industrial Applications, Craft and Hobbies Applications, Theme,and much more.
Gypsum and wax can usually be molded into polyurethane molds without any release agent, but most concrete mixtures and polyurethane resins require a suitable release agent (e.g. Pol-Ease ® 2300 Release Agent ).
| product | Ratio Mix | Shore Hardness | Working time | Pull time | colour |
| Poly 74-45 | 1A:1B (by weight) | A45 | 30 min. | 16 hr. | yellow |
| Poly 75-65 | 1A:1B (by weight) | A65 | 35 min. | 16 hr. | Amber |
| Poly 75-70 | 1A:1B (by weight) | A70 | 40 min. | 16 hr. | grey |
No customer reviews for the moment.
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
