PlatSil Deadener LV (Low-Viscosity) is ideal for softening or gelling PlatSil Gel series silicones without oil exudate. It is used to create gel prosthetic aplations. Varying the amount of deadener added to PlatSil Gel silicone can obtain different degrees of softness.
PlatSil Deadener LV should be added up to 300% of the A+B silicone mixture. A healing test should be performed to determine the appropriate amount to add for individual applications.
Smith's Prosthetics Deadener can also be used to soften or "dampen" PlatSil Gel silicone. Some may prefer PlatSil Deadener LV because it has a lower viscosity.
If you replace LV with Smith's Deadener, or vice versa, you'll need to adjust your proportions as their smoothing effect differs between the two products.
Always add the Deadener to Part A, before mixing with Part B
When the Deadener is added the silicone loses its consistency and the material becomes sticky to the touch. In order to create a prosthetic application it is necessary to encapsulate the silicone mixed with the deadener, this is achieved by applying a thin layer of the resulting slicone gel in a mold that has previously been coated with a Bald Cap such as the Key-Cap Plastic.
No customer reviews for the moment.
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
