Horario de atención y direcciones de las tiendas

Smooth-On Polyurethane Foams

FlexFoam-iT!

FlexFoam-iT!

Polyurethane foam two strong, versatile and flexible components.
Easy mixing per volume.
It expands to several times its volume, depending on the reference
Ideal for Special Effects (FX), theatrical decor, props ...

More details...

Availability : This product is no longer in stock

FLEX FOAM-IT! III

29,00 €

tax excl.

FlexFoam-iT!® expanding flexible foams are easy to use and durable. They are lightweight, versatile and most are available in easy to measure mix ratios. They can be used for padding/cushion material, gasket material, or to make props and special effects. Vibrant colors can be achieved by adding color pigments. 

FlexFoam-iT!® Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong®, UVO® or IGNITE® colorants can be added for color effects.

Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. FlexFoam-iT® III is the lowest density foam and expands the most.

Crystal Clear

Preparation - Store and use at room temperature (73°F/23°C). Environmental humidity should be as low as possible. Good ventilation (room size) is essential. This product has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

flexfoam

Pre-mix Parts A & B – Stir or shake both Part A & Part B thoroughly before dispensing.

Measuring – Stop! Know the mix ratio of the foam product you are using. Some are by weight and some are by volume. Dispense the correct amounts of Part A and Part B into a large mixing container.

For Best Results - Pre-Mix Part B after measuring out material – although not necessary, pre-mixing Part B using a drill and mechanical mixer (such as a turbine mixer available from Smooth-On) after measuring out and before combining with Part A will yield best results. For Best Results - Use a Mechanical Mixer – Mix for 30 seconds and pour into mold or form.

Mixing by Hand – Stir quickly and deliberately for 30 seconds. Make sure that you aggressively scrape the sides and bottom of your mixing container several times. Pour into mold or form.

Be careful not to splash low-viscosity liquid out of container. Remember, these materials cure quickly. Do not delay between mixing and pouring.

No customer reviews for the moment.

Write your review

FlexFoam-iT!

FlexFoam-iT!

Polyurethane foam two strong, versatile and flexible components.
Easy mixing per volume.
It expands to several times its volume, depending on the reference
Ideal for Special Effects (FX), theatrical decor, props ...

Write your review

Customers who bought this product also bought :

Measuring cup for mixing

Measuring...

0,70 €

Acrystal Retardant

Acrystal...

5,00 €

Mold release wax 34D

Mold release...

15,00 €

Silicone Thixo Additive

Silicone...

9,00 €