Horario de atención y direcciones de las tiendas

Smooth-On Polyurethane Resins


Average grade 

High Performance Polyurethane Resin.
Physical properties superior to the Smooth-Cast series.
High impact resistance.
Different versions. Find yours!

More details...

Warning: Last items in stock !

Kit de 1,02 Kg.

25,00 €

tax excl.

Flame Out® is a low viscosity, fast set casting resin that meets UL 94 V-O requirements for flame resistance. It does not contain mercury, TDI or MOCA. Mix ratio is 1A:1B by volume. Pot life is 2.5 min. and demold time is 10 min. at 73°F / 23°C (depending on mass).

Fully cured Flame Out® material is tough, durable, machinable and paintable. It has much higher physical and performance properties than any other flame rated urethane available anywhere. Vibrant colors and color effects are possible by adding SO-Strong® color tints. Applications for Flame Out® include making flame resistant prototype and architectural models, model toys, theme park and stage elements, durable miniatures and special effect props. Material can also be used for potting and encapsulation applications.

Materials should be stored and used in a warm environment (73° F / 23° C). This product has a limited shelf life and should be used as soon as possible. All liquid urethanes are moisture sensitive and will absorb atmospheric moisture. Mixing tools and containers should be clean and made of metal, glass or plastic. Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Because no two applications are the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Applying A Release Agent - A release agent is necessary to facilitate demolding when casting into or over most surfaces. Use a release agent made specifically for mold making (Universal® Mold Release or Mann’s Ease Release® 200 available from Smooth-On or your Smooth-On distributor). A liberal coat of release agent should be applied onto all surfaces that will contact the plastic

IMPORTANT: To ensure thorough coverage, apply release and brush with a soft brush over all surfaces. Follow with a light mist coating and let the release agent dry for 30 minutes.

Smooth-On silicone rubber molds usually do not require a release agent when casting urethane resin into the mold. Applying a release agent will prolong the life of the mold.

Pre-mix Part A and Part B before dispensing.

Measuring - The proper mixing ratio of Flame Out® is 1 Part A to 1 Part B by volume. Dispense equal amounts into a mixing container.

If tinting or pigmenting Flame Out®, add color to Part B and mix thoroughly before adding Part. A.

Mixing - Stir deliberately making sure that you scrape the sides and bottom of the mixing container several times. Be careful not to splash low viscosity material out of container.

Valentin M

prueba resina TA SK7

Es una resina bastante densa, por lo que el nivel de copia de detalles es inferior a la serie Smooth-Cast, también tiene serios problemas de catalizado, tardando bastante en que la pieza copiada consiga ser consistente, y encima el color es un blanco menos puro que el conseguido con la Smooth-Cast, para mí es un paso, o dos atrás con respecto a la Smooth-Cast, me decepcionó , pero bastante.

Write your review



High Performance Polyurethane Resin.
Physical properties superior to the Smooth-Cast series.
High impact resistance.
Different versions. Find yours!

Write your review

Customers who bought this product also bought :

Carfer Carbonate


4,25 €

Epofer EX 610 A + E 610 B

Epofer EX...

8,10 €

Poly 15-3 -Resina de Colada de Alto Rendimiento-

Poly 15-3...

20,00 €

Acrystal Prima Powder + Acrylic Emulsion


16,00 €