Horario de atención y direcciones de las tiendas

Smooth-On

Quarry Tone -Granite load-

  • Granite load
  • It can be used with Polyurethane and polyester resins
  • Easy to mix

More details...

Availability : This product is no longer in stock

20,50 €

tax excl.

Quarry Tone® Granite FX are powder loads that can be added to different types of resins to create realistic stone effects upon casting pieces.

There are 10 different color tones to choose from, each with its own particle size and color.

Quarry Tone® Granite FX Fillers are specially blended powders that can be added to some Smooth-Cast® liquid plastics or liquid rubbers to create realistic stone effects in finished castings. There are 10 granite effects powders to choose from, each with its own particle size and color.

For best results, use Quarry Tone® powders with a fast-curing translucent resin such as Smooth-Cast® 325. The fast curing resin allows uniform filler dispersion throughout the finished casting. If the resin system is too slow, fillers may settle unevenly in the finished casting. Quarry Tone® powders can also be added to translucent / clear silicone rubbers such as Dragon Skin® or EcoFlex® Series for granite-like props that are soft and flexible. Quarry Tone® powders can also be blended to create additional finished effects. 

Pre-mix before dispensing. Store and use all materials at or near 73°F/23°C. Quarry Tone® fillers must be kept dry. Use with adequate ventilation. Read and follow directions for resin used to mix with Quarry Tone® fillers. The following example features Smooth-Cast® 325 (A+B) mixed with Quarry Tone® powder. The powder must be thoroughly dispersed into a two component liquid resin or rubber to a uniform consistency.

quarry

Recommended Mix Ratio by Volume:

1A + 1B + 2 Parts Powder Filler.

By Volume Mixing & Casting Procedure:

  1. Dispense 1 cup of Smooth-Cast® 325 Part B into a clean mixing container.
  2. Dispense 2 cups Quarry Tone® powder into mixing container.
  3. Mix thoroughly.
  4. Dispense 1 cup of Smooth-Cast® 325 Part A into mixing container.
  5. Mix for 30 seconds until all filler particles are dispersed and pour into rubber mold.

Customers who bought this product also bought :

Ferosil V 32

Ferosil V 32

2,20 €

Curing Agent 81F

Curing Agent...

5,00 €

Epofer EX 610 A + E 610 B

Epofer EX...

8,10 €

Bronze Powder Metal Load

Bronze...

13,00 €