
product | By quantity | discount |
---|---|---|
EASYL 3520 Base + Catalyst : capacity - 20 kg. | 5 | -5% |
EASYL 3520 is atwo-component silicone elastorgrouper (parts A and B) that cures at room temperature, the base (part A)has the appearance of a viscous liquid liquido that,afterthe addition of the EASYCAT-20 catalyst (part B),is transformed intoanaestic material. It has exceptional fluidity and good operability
EASYL 3520 Mold Silicone is characterized by its high value for money. It is our most economical silicone, but nevertheless behaves very well in any type of mold.
EASYL 3520 is recommended for the application of molds for plaster castings, Polyester Resin, Polyurethane Resin, Epoxy Resin, Fiberglass, Wax, Soap, Bronze, etc.
Being a type of soft silicone rubber with low viscosity, it is suitable for molds with complicated gaps that are difficult to mold.
instructions:
1- Prepare the box for the mold and the original.
2-Set aside 100 parts of the base (Part A) and add 5 catalyst parts (Part B) to mix both parts very well until a homogeneous mixture is achieved.
3-Pour the silicone pour into the box or apply to brush if it has been previously thixotropiced.
NOTE: Low hardness silicone is normally used for casting molds, as it allows for better pulling and thus does not damage the original.
product | proportion mixture | Curing Time | Resistance to Breakage | Viscosity of the mixture | Working Time | Shore A Hardness | Tensile Strength | colour |
EASYL 3520 | 100:5 (5% catalyst) | 30 min | 400% | 13000 cps | 5-10 min. | 20 | 33 Kgf/cm | white |
SILICONE ONE-SIDED MOLD
DOUBLE-SIDED SILICONE MOLD
MOLDE TO PINCEL by SIMBIOX
No customer reviews for the moment.
Write your review
* Required fields
or Cancel