Tin (Condensation)

Low-Cost Silicone Base + Catalyst

Low-Cost Silicone Base + Catalyst
  • Tin silicone for low-use molds.
  • Unsurpassed value for money
  • Easy ratio mix 100A: 2B

Read more...

availability: Product sold out right now

1 Kg.
5 kg.
20 kg.

10,90 €

No VAT
13,19 € (tax incl.)

Feroca's Low-Cost Silicone is a two-component silicone elastor grouper(parts A and B) that cures at room temperature, the base (part A)has the appearanceofa viscous liquidthat,after the additionofthecatalyst (part B), istransformed into anaestic material. It has exceptional fluidity and good operability

Low-Cost Silicone Mold Silicone is characterized by its high value for money. It's our most economical silicone, and is ideal for low-use molds, which doesn't mean it has amazing replica capacity.

Low-Cost Silicone is recommended for the application of molds for plaster castings, Polyester Resin, Polyurethane Resin, Epoxy Resin, Fiberglass, Wax, Soap, Bronze, etc.

It is a type of soft silicone rubber with medium viscosity, so if desired you can lower the viscosity using Silicone Fluid. It is suitable for molds with complicated gaps that are difficult to mold.

instructions:

1- Prepare the box for the mold and the original.
2-Set aside 100 parts of the base (Part A) and add 2 catalyst parts (Part B) to mix both parts very well until a homogeneous mixture is achieved.
3-Pour the silicone laundry into the box or apply to brush if it has been previously thixotropiced.
NOTE: Low hardness silicone is normally used for casting molds, as it allows for better pulling and thus does not damage the original.

product

proportion

mixture

Curing Time

Resistance to Breakage

Viscosity of the mixture

Working Time

Shore A Hardness

Tensile Strength

colour

Low-Cost Silicone

100:2

(2% catalyst)

10-15 Hours400%13000 cps25 min.2533 Kgf/cmwhite

lupa

SILICONE ONE-SIDED MOLD


DOUBLE-SIDED SILICONE MOLD

MOLDE TO PINCEL by SIMBIOX


No customer reviews for the moment.

Write your review

Low-Cost Silicone Base + Catalyst

Low-Cost Silicone Base + Catalyst

  • Tin silicone for low-use molds.
  • Unsurpassed value for money
  • Easy ratio mix 100A: 2B

Write your review

Customers who bought this product also bought :

3M Particle Mask™ 8822 FFP2

3M Particle...

3,50 €

Curing Agent 81 VF

Curing Agent...

5,00 €

Worbla's Transpa Art. Transparent Thermoplastic

Worbla's...

15,29 €

High-Shear Mixing Blades

High-Shear...

25,00 €