- ShoreA 60 High Quality Hardness Tin Silicone.
- Perfect for low melting point metals (up to 315 oC).
- Easy to use,ratio mix 5A:100B
Tinsil 70-60 Silicone is a very easy-to-use Shore A 60 hardness tin (condensation) silicone, which is mixed at 5% catalyst (5A:100B) by weight.
Tinsil 70-60 Silicone features relatively low mixing viscosity and once cured has no appreciable shrinkage. This silicone has a tear resistance far superior to other silicones for low melting point metals on the market.
Molds will last until 315 oC
Features of Tinsil 70-60:
| product | Mix A:B | Working Time | Curing Time | Shore Hardness | colour | Mix Viscosity | Tear Resistance | Specific Weight |
Tinsil 70-60 | 5:100 by weight | 30 min. | 24 Hours | A60 | red | 17000 cP. | 63 pli | 1.5 |
No customer reviews for the moment.
At the forefront of materials for molding in Spain for more than 35 years, Feroca continues to innovate, and continuously add products to its catalog, always looking for new and better materials that facilitate the molding and modeling tasks of our customers as much as possible. That is why Feroca seeks partnerships with the key manufacturers of each type of product, which has led us to be a distributor of the most prestigious brands in the sector, among which Polytek, Neill's Materials, Dow Corning, Chavant, Monster Makers and many more.
To ensure the proper use of our products, Feroca conducts video tutorials where we explain how to use our products. Likewise, it periodically organizes courses aimed at teaching the handling of our materials, as well as all the possibilities they have. Our WorkShops are a benchmark in the teaching of Mold Making, and FX. We put all our experience and effort so that our customers are always satisfied, both with their purchase and with the results obtained with our products. In addition to an immediate and easily accessible after-sales service thanks to our numerous contact channels, telephone, e-mail and main social networks.
