Horario de atención y direcciones de las tiendas

Vacuum Systems

Complete vacuum system for degassing

Vacuum system consisting of a pump and a vacuum hood.
12 CFM pump (20.4 m3 / hour) or 99.995% vacuum.
26-liter hood with transparent lid.
Includes everything you need to get the system up and running.

More details...


600,00 €

tax excl.

Our vacuum system (pump and bell) is perfect for degasifying most silicones or resins before they begin their curing process and air bubbles are trapped, including the fastest resin of all, polyurethane.

The bigger the bell, the more things will fit, so you can fit from a small wash to a 20 kg drum. Of resin or silicone to degas it. A large bell (26 liters) can be emptied by any pump, small or large, and this is where we start talking about the pumps.

In the market you can find large and small vacuum pumps, the difference between one and the other, besides the quality of the joints, is the suction power, ie how fast they effect the total vacuum of the hood.
There are small vacuum systems on the market, but these systems will not serve to degass certain products, such as polyurethane, why? Because these small systems will effectively make the total vacuum (99.995%), but they take too long and the polyurethane is too fast for them. In this case, just like the bell is large or small, if the pump is small (less than 8 CFM), it will only allow its use in long-cure products (silicones, polyester). With a large pump (from 10 CFM) you can make quick emptyings (over 1 minute) so it gives time to draw air from the product mix like polyurethane before it hardens. Keep in mind that the air is coming out during the vacuum process, not at the end of it.
For all this we are completely sure that our vacuum system will cover all your molding needs, allowing you to make professional-quality runs, free of nasty bubbles or air bubbles.
The Feroca vacuum system includes everything you need to get it going, oil, hose, silicone gasket, power cable and connectors.


Internal volume External dimensions (mm) Internal dimensions (mm)
(H x Diameter) Weight (kg) Recommended capacity
26L 440 x 395 x 330 295 x 290 14.55 6L


(12CFM / 340l / m)
Time to 90% vacuum 0m 30s
Time to 99% vacuum 1m 0s
Time to 99.9% vacuum 1m 30s
VERY IMPORTANT: Choose correctly between 110V and 240V (240V usually in Spain) and fill the oil tank to the level indicated in the instructions before starting the pump for the first time.

Customers who bought this product also bought :

3D-SMOOTHER -Recubrimiento Epoxi para impresiones 3D-


11,00 €

Pigment paste

Pigment paste

3,70 €

Desmofer V8130 -Alcohol Polivinílico o Alcote-


3,10 €

TRANSLUX D150 -Epoxi Transparente de Colada-


30,00 €