Horario de atención y direcciones de las tiendas

Worbla.

Worbla's Transpa Art.

Worbla's Transpa Art.

Transparent reusable thermoplastic films.
Heat to 120 ° C to activate.
Ideal for Cosplay, Scenery and FX makeup.

More details...

Plancha de 50x75 cm.
Plancha de 75x100 cm.
Plancha de 100x150 cm.

15,29 €

tax excl.

Worbla Transpa Art requires an activation temperature greater than 120 ° C compared to the Worbla Finest Art (WFA) which does so at 90 ° C. That is why it is advisable to wear thermal gloves when using Transpa Art de Worbla, remember that you are heating it above the boiling point of the water. It is also advisable to use a damp sponge to shape, to avoid marks and scratches, and a strong toothbrush is useful for obtaining small complex curves to shape.

The material hardens in a matter of minutes, and is reactivated at any time. This allows gradual molding to gradually form the desired part.

Fantastic for visors, glasses, ice blades, invisible joints and anything you can imagine, Transpa Art de Worbla (WTA) has a similar flexibility to Worbla's Finest Art (WFA) and shares the technical ability to mix leftovers for Recycle everything.

Transpa_art_3objekte

It can be used Transpa Art de Worbla in stable and flat forms, simple compositions and even mass kneading, if necessary. The kneading becomes milky and diffuse. This helps to create LED lighting effects, among other decorative elements like gemstones.

The excess material is removed with a cutter or similar and then heated again. However, it can be melted and mixed well to a certain degree. Rough areas on the surface can be treated by a clear coat, for example, nail polish.

Although Transpa Art is similar to Finest Art, they are not the same product and you will find that Transpa Art does not have the same adhesive qualities as Finest Art and will require more patience and time to achieve the desired look. It is possible to glue Transpa Art to itself, but the temperature range is very narrow, so it is recommended to use a transparent glue that will leave no visible traces on the final piece.

Customers who bought this product also bought :

Fiberglass Scissors

Fiberglass...

16,50 €

Catalyst F11

Catalyst F11

2,20 €

Mold making basic Kit - Small pieces

Mold making...

42,40 €

ACMOS 82-2405 -Desmoldeante en spray de cera-

ACMOS...

10,00 €